alejandrogs73/G26-Telemetry-Software
1
0
Fork 0
mirror of https://github.com/adrigongv23/G26---Telemetry-Software.git synced 2026-08-25 11:33:17 +02:00
Code Issues Projects Releases Packages Wiki Activity Actions

Implementación de IP estática

Browse source
This commit is contained in:
adrigongv23 2026-07-20 08:56:57 +02:00
parent ec4742145f
commit 385adaf90a
4 changed files with 15 additions and 5 deletions
Download patch file Download diff file Expand all files Collapse all files

10
Firmware/G26-Telemetria/G26-Telemetria.ino
View file

@ -58,6 +58,16 @@ void setup() {
// 2. INICIAR WIFI
Serial.println("--- CONECTANDO WIFI ---");
//IP estática dentro de la red del CPE (DHCP desactivado en el CPE)
IPAddress local_IP(192, 168, 0, 50);
IPAddress gateway(192, 168, 0, 254);
IPAddress subnet(255, 255, 255, 0);
if (!WiFi.config(local_IP, gateway, subnet)) {
Serial.println("[ERR] Fallo al configurar IP estática");
}
WiFi.begin(WIFI_SSID, WIFI_PASSWORD);
int intentos = 0;

2
Firmware/G26-Telemetria/include/data_processor.hpp
View file

@ -13,7 +13,7 @@ public:
//Variable publica para el CAN
volatile int current_ect_value = 0;
volatile int current_rpm_value = 0;
volatile float current_vbatt_value = 0.0
volatile float current_vbatt_value = 0.0;
//Métodos de recepción de CAN

2
Firmware/G26-Telemetria/src/can.cpp
View file

@ -11,7 +11,7 @@ static bool driver_installed = false;
void CAN::start() {
Serial.println("Starting CAN Controller...");
twai_general_config_t g_config = TWAI_GENERAL_CONFIG_DEFAULT((gpio_num_t)TX_PIN, (gpio_num_t)RX_PIN, TWAI_MODE_NORMAL);
twai_timing_config_t t_config = TWAI_TIMING_CONFIG_125KBITS();
twai_timing_config_t t_config = TWAI_TIMING_CONFIG_500KBITS();
twai_filter_config_t f_config = TWAI_FILTER_CONFIG_ACCEPT_ALL();
esp_err_t install_status = twai_driver_install(&g_config, &t_config, &f_config);

4
Firmware/G26-Telemetria/src/data_processor.cpp
View file

@ -24,11 +24,11 @@ void DataProcessor::send_serial_frame_0(int rpmh, int rpml, int tpsh, int tpsl,
Serial.println("send_serial_frame_0");
// Actualizamos las variables globales para que puedan ser leidas por el protocolo UDP
this -> current_ect_value = ect;
this->current_ect_value = ect;
this->current_rpm_value = rpm;
this->current_vbatt_value = vbatt;
// Serial.printf("CAN RX -> ECT: %d | RPM: %d | BATT: %.1f \n", ect, rpm, vbatt);;
Serial.printf("CAN RX -> ECT: %d | RPM: %d | BATT: %.1f \n", ect, rpm, vbatt);;
}
/*