first commit

2026-09-27 17:21:39 +02:00 · 2026-09-27 17:21:39 +02:00 · e6a42e28e9
commit e6a42e28e9
4355 changed files with 4626605 additions and 0 deletions
--- a/libraries/TinyGSM/tools/AT_Debug/AT_Debug.ino
+++ b/libraries/TinyGSM/tools/AT_Debug/AT_Debug.ino
@ -0,0 +1,99 @@
+/**************************************************************
+ *
+ * This script tries to auto-detect the baud rate
+ * and allows direct AT commands access
+ *
+ * TinyGSM Getting Started guide:
+ *   https://tiny.cc/tinygsm-readme
+ *
+ **************************************************************/
+
+// Select your modem:
+#define TINY_GSM_MODEM_SIM800
+// #define TINY_GSM_MODEM_SIM808
+// #define TINY_GSM_MODEM_SIM868
+// #define TINY_GSM_MODEM_SIM900
+// #define TINY_GSM_MODEM_SIM7000
+// #define TINY_GSM_MODEM_SIM7000SSL
+// #define TINY_GSM_MODEM_SIM7080
+// #define TINY_GSM_MODEM_SIM5360
+// #define TINY_GSM_MODEM_SIM7600
+// #define TINY_GSM_MODEM_A7672X
+// #define TINY_GSM_MODEM_UBLOX
+// #define TINY_GSM_MODEM_SARAR4
+// #define TINY_GSM_MODEM_SARAR5
+// #define TINY_GSM_MODEM_M95
+// #define TINY_GSM_MODEM_BG95
+// #define TINY_GSM_MODEM_BG96
+// #define TINY_GSM_MODEM_A6
+// #define TINY_GSM_MODEM_A7
+// #define TINY_GSM_MODEM_M590
+// #define TINY_GSM_MODEM_MC60
+// #define TINY_GSM_MODEM_MC60E
+// #define TINY_GSM_MODEM_ESP8266
+// #define TINY_GSM_MODEM_ESP32
+// #define TINY_GSM_MODEM_XBEE
+// #define TINY_GSM_MODEM_SEQUANS_MONARCH
+
+// Set serial for debug console (to the Serial Monitor, speed 115200)
+#define SerialMon Serial
+
+// Set serial for AT commands (to the module)
+// Use Hardware Serial on Mega, Leonardo, Micro
+#ifndef __AVR_ATmega328P__
+#define SerialAT Serial1
+
+// or Software Serial on Uno, Nano
+#else
+#include <SoftwareSerial.h>
+SoftwareSerial SerialAT(2, 3);  // RX, TX
+#endif
+
+#define TINY_GSM_DEBUG SerialMon
+
+#include <TinyGsmClient.h>
+
+// Module baud rate
+uint32_t rate = 0;  // Set to 0 for Auto-Detect
+
+void setup() {
+  // Set console baud rate
+  SerialMon.begin(115200);
+  delay(6000);
+}
+
+void loop() {
+  if (!rate) { rate = TinyGsmAutoBaud(SerialAT); }
+
+  if (!rate) {
+    SerialMon.println(
+        F("***********************************************************"));
+    SerialMon.println(F(" Module does not respond!"));
+    SerialMon.println(F("   Check your Serial wiring"));
+    SerialMon.println(
+        F("   Check the module is correctly powered and turned on"));
+    SerialMon.println(
+        F("***********************************************************"));
+    delay(30000L);
+    return;
+  }
+
+  SerialAT.begin(rate);
+
+  // Access AT commands from Serial Monitor
+  SerialMon.println(
+      F("***********************************************************"));
+  SerialMon.println(F(" You can now send AT commands"));
+  SerialMon.println(
+      F(" Enter \"AT\" (without quotes), and you should see \"OK\""));
+  SerialMon.println(
+      F(" If it doesn't work, select \"Both NL & CR\" in Serial Monitor"));
+  SerialMon.println(
+      F("***********************************************************"));
+
+  while (true) {
+    if (SerialAT.available()) { SerialMon.write(SerialAT.read()); }
+    if (SerialMon.available()) { SerialAT.write(SerialMon.read()); }
+    delay(0);
+  }
+}